10-8005
Ink fluid level too high to operate.
The level of ink inside the ink tank has risen up past the maximum allowed. There are a couple of reasons for this error to show.
01
Drain some of the Ink
Someone has added a bottle of ink without the printer requesting it. You will need to drain some of the ink out.
02
Check the Viscosity
The printer has been started and stopped multiple times and the makeup used for flushing on a shut down has been added to the ink tank causing it to overfill. Check the viscosity to see if the ink is too thin. If the ink is too thin you will need to empty the ink tank and refresh the ink.
03
Check the Floats
Remove the float switch assembly from the tank and make sure that the floats are not stuck in the upper position.